Service lift ISO-D
Service lift with swing doors serving at floor level
Standard complies to EN 81-3 + EU-MRL2006/42/EWG.
Attention: Concerning to EN-81-3 part 8.5 car entrance a load protection can be necessary!
Standard equipment at no extra-charge:
Structure
- Steel structure, made of cold rolled galvanized special profiles
- pre-installed with T-guides T 45 x 5 + plastic trunking in 2 m segments
Cabin
- Cant-off system made of galvanized steel, adjustable guide shoes on both sides
- Compensation device on suspension ropes / chains
Hinged doors
- manual operated hinged doors, made of galvanized steel in accordance to DIN 18090
- production controlled by TÜV-authorities
- with side frames made of galvanized steel according to drawing
- door locks type-tested by TÜV-authorities
Machine room door
- single hinged door (DW = 800 mm = double hinged), with sash lock, both hinging sides available
- with side frames made of galvanized steel according to drawing
Drive unit
- Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V /50 Hz. according to IEC
- Q = 100 kg: sheave Ø 300 diameter for 2 ropes Ø 6 mm
Q > 100 - 300 kg: 2 chain wheels for 2 chains 5/8 x 3/8“ DIN 8187
Counter weight or balancing weight
- galvanized frame construction with iron in fills
Controller
- call and send control with 24 V, safety circuit 230 V
- pre-wired with plugs
- adjustable and time-limited despatch delay device (1-5 s)
- acoustic arrival signal
- position indicator on each entrance
- thermic motor protection as main switch pre-wired on control panel
- machine room light with socket