Model ISO-A - Service lift with bi-parting doors on serving height

You are here: PRODUCTS » SERVICE LIFTS » ISO-A

Service lift type ISO-A

Service lift with bi-parting doors on serving height ≥ 700 mm

Standard complies to EN 81-3 + EU-MRL2006/42/EWG.

Attention: Concerning to EN-81-3 part 8.5 car entrance a load protection can be necessary!

Standard equipment at no extra-charge:

Structure

  • Steel structure, made of cold rolled galvanized special profiles
  • pre-installed with T-guides T 45 x 5 + plastic trunking in 2 m segments

Cabin

  • 600 - 800 mm height (resp. 900 - 1200 mm extra-charge)
  • Cant-off system made of galvanized steel, adjustable guide shoes on both sides
  • removable shelf
  • Compensation device on suspension ropes / chains

Bi-parting doors

  • 600 - 800 mm height (resp. 900 - 1200 mm extra-charge)
  • manual operated bi-parting doors made of galvanized steel in accordance to DIN 18092
  • production controlled by TÜV-authorities
  • with side frames made of galvanized steel according to drawing
  • door locks type-tested by TÜV-authorities

Machine room door

  • single hinged door (DW = 800 mm = double hinged), with sash lock, both hinging sides available
  • with side frames made of galvanized steel according to drawing

Drive unit

  • Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V /50 Hz. according to IEC
  • Q = 50 - 100 kg: sheave Ø 300 diameter for 2 ropes Ø 6 mm
  • Q > 100 - 300 kg: 2 chain wheels for 2 chains 5/8 x 3/8“ DIN 8187

Counter weight or balancing weight

  • galvanized frame construction with iron in fills

Controller

  • call and send control with 24 V, safety circuit 230 V
  • pre-wired with plugs
  • adjustable and time-limited dispatch delay device (1-5 s)
  • acoustic arrival signal
  • position indicator on each entrance
  • thermic motor protection as main switch pre-wired on control panel
  • machine room light with socket

Downloads

Gallery