ISO-D with swing doors serving at floor level

Service lift ISO-D

Service lift with swing doors serving at floor level

Standard complies to norm EN 81-3 and the machine directive 2006/42/EC

Standard basic equipment:

Structure

• Self-supporting steel structure
• Made of cold rolled galvanized special profiles
• Pre-installed in 2 m segments with guides T 45 x 5 mm

Cabin

• Load capacity 100 — 300 kg
• Up to 3 loading sides
• Without or with safety gear
• Width 500 — 1000 mm
• Depth 600 — 1000 mm
• Height 800 — 1200 mm
• Width, depth and height in 25 mm grid
• Cant-off system made of galvanized steel
• On both sides adjustable guide shoes including emergency guidance
• Balancing devices on the suspension element

Swing doors

• Width 500 — 1000 mm
• Height 800 — 1200 mm
• Width and height in 25 mm grid
• Single hinged swing door
• Manual oprated
• Made of galvanized steel
• Both hinging sides available
• Study plastic door handle
• In accordance to DIN 18090
• Frames made of galvanized steel
• Door locks type-tested by TÜV-authorities

Machine room door

• Width 500 — 1000 mm
• Height 600 mm
• Width in 25 mm grid
• Door leaf made of galvanized steel (DW ≥ 800 mm = double hinged)
• Both hinging sides available
• Cam lock
• Frames made of galvanized steel
• Door leaf flush with door frame

Drive unit

• Drive unit with worm gear and with factory oil filling
• Standard motor IP 54
• Disc brake
• Hand wheel
• 3 x 400 V / 50 Hz. according to IEC
• If with drive above in shaft and without safey gear
  Q = 100 kg: sheave Ø 300 mm for 2 or 3 ropes Ø 6 mm
  Q > 100 — 300 kg: 2 chain wheels for 2 chains 5/8 x 3/8“ DIN 8187
  (Counter weight or balancing weight as galvanized frame construction with iron fills)
• If the drive position is different from above in shaft and/or with safety gear
  Q = 100 — 300 kg: drum Ø 240 mm for 2 ropes Ø 5 or 6 mm

Controller

• Microprocessor control SKG-AS-3
• Plastic control cabinet 160 x 250 x 100 mm (W x H x D)
• Call and send control 24 V
• Safety circuit 48 V
• Pre-wired with plugs
• Adjustable and time-limited despatch delay device
• In the push button box of each landing:
• One call and send button
  Acoustic arrival signal
  Location indicator
  Direction indicator
  Door "Open" indicator
  Error indicator
• Thermic motor protection as main switch
• Machine room light with switch and socket

Downloads

Gallery